Beast Hunters!

Predacons Galore!

The funny thing about toy lines with promotional media tie ins is the ironic fact that the toys don't ever really have to match the media. Transformers Prime Beast Hunters is a perfect case study into this particular phenomenon. Disregarding all the internet hearsay which states that the entire premise of Beast Hunters was added on clumsily to the already successful Transformers Prime animated show and toy line to extend toy sales, the fact remains that almost the entirety of the Beast Hunters toy line has nothing to do with the show.

In the past, Transformers toys were released to coincide with the animated series. Literally, a character would be introduced and you could go out to the store and buy that character's action figure the same week. A perfect example would is Transformers Beast Wars. Arguably second to Transformers Prime in story telling and maturity, Beast Wars ran for 3 seasons like Prime. However, while Prime introduced re-imaginings of the core characters which did not appear in the show, Beast Wars redesigned the characters from events in the shows cannon. This logical action made it very easy for collectors to buy a second recolored version of the 
character or even buy the same character in a different rendition  
(regular, Trans-metal, Trans-metal 2).

Japan Only

Sadly, Beast Hunters introduced an entire line of figures which represent the core cast of protagonists and villains and a new host of beasts without any appearance on the show. This disconnect seems like it would be a disastrous. Some would argue for or against the results. I can only say that as a hardcore Transformers collector, I have only bought 2 figures (deluxe Smokescreen and voyager Optimus Prime) and I only intend to purchase 1 more in the future (ultimate Predaking). My own preference in collecting dictates I follow the fictional cannon of the show. I purchase the best representations of each character in the show, factoring in the scale of the toys to the show iterations. 

Non-Show Hasbro Figures
*Select Images Courtesy of Seibertron.com

That being said, the biggest question is why didn't Hasbro release figures that Takara Tomy did? Why would they create an entire line of fictional alternate modes for the core cast of characters for Prime and rename the show under the Beast Hunters banner when there was a perfectly good stable of figures that remain unreleased outside of Japan? Some suspect licensing issues or shared costs of the tooling and molds. Some say Beast Hunters was a huge marketing campaign which did not take into consideration the hardcore fans and toy collectors and instead focused on the Transformers brand and the casual consumer (parents who purchase toys for their children). 

The rational does not really make sense since Hasbro released some characters that were not found in the show including Hot Shot, Dead End, Rumble, Kup, Thundertron, or the early version of Ultra Magnus. Why wouldn't they release Breakdown, Unicron, Silas, Nemesis Prime, Jet Vehicon, and Vehicon General? All the before mentioned appeared prominently in various episodes. Then there is the horde of additional characters that were created by recoloring previously released molds. Some of these figures featured entirely new head sculpts, including Swerve, Lio Prime, and Wild Rider.

Wonderful World of Import Characters
*Select Images Courtesy of Seibertron.com

Regardless, there can be no argument that there are still a ton of figures that remain unreleased to the western market. Who knows if they will ever be made available. In the end, it may be too late as many like me turned to the grey market to purchase import products from Japan. 

Review Transformers Prime Beast Hunters Season 3 Finale Episode 13 Deadlock

Wow, so Transformers Prime animated television series has finally ended and what a ending! 

SPOILERS AHEAD! YOU HAVE BEEN WARNED.

The climatic series finale, Episode 13, Deadlock, has it all. We see the death two of major character, resurrection of one of those major characters, the return of some powerful and often forgotten weapons, and even tongue in cheek nods to some past episodes from the previous seasons. It's 20 minutes packed full of explosions, action, drama, and suspense which leads up to a somewhat satisfying ending. Definitely a bitter sweet pill to take as Transformers Prime is, in my opinion, the best Transformers series that has ever been produced in any format.


The main thing I loved is the all out assault nature of this episode which adds a "all or nothing" feeling to the final conflict between the Decepticons and Autobots. It just feels definitive. We haven't seen anything like this yet. Set dramatically over the Earth's orbit, the full Autobot force (both Scout Team and Wreakers) launch an all out assault on the Decepticon Nemesis warship to stop Megatron from cyberizing the Earth. Characters carry both their default weapons, as well as some of their assault weapons load outs, including Bumble Bee's force shield and the Wreckers heavy weapons. It's also a great nod to see both the Star Saber and the Dark Star Saber make their return.

Heroic Bumble Bee about to get shot in the chest.

Another great nod is when Soundwave uses the Space Bridge as a weapon to displace the Wreckers assault on the Nemesis bridge and also how Jack, Miko, and Raph use the same trick to trap Soundwave in the Shadow Zone. Also a nice nod is when Miko shows up in the Apex Armor and takes out several Vehicons.

Bumble Bee falls to his apparent death.

While this is a epic conclusion, there are some things that linger on and bother me about the ending of this series. The main thing that bothers me is how Bumble Bee's seemingly death and resurrection was handled and the death of Megatron. Ultimately I thought the episode was flawless up until Megatron death. Bumble Bee's apparent death was both heroic and poetically tragic at the same time. I felt  he was yet another soldier who paid the ultimate sacrifice in the war against Megatron's tyranny. Resurrecting him in some "magical" artificial Energon pool and having him stab Megatron from behind kind of sucked. It negates both Optimus Prime as a leader and warrior. It negates Megatron as this bad ass cunning gladiator from the pits of Kaon. It give no purpose to Bumble Bee's apparent sacrifice. I understand that Bumble Bee is probably the only character with a vendetta against Megatron. Megatron tortured Bee, maimed him by ripping out his voice box, and also took over his body during season 1. I'm sure there would be physiological damage to Bee after all that but still it just seems like a cop out because Transformers Prime, despite it's dramatic story, is still a children's show geared toward selling toys. I'd rather have had Smokescreen kill Megatron since they heavily eluded to him being Optimus Prime's successor. Why build up Smokescreen as "the next Prime" and then have him get shot in the shoulder and taken out of the battle? Hmm.

Megatron impaled by the resurrected Bumble Bee.

A few other additional loose ends are left hanging too. Predaking is shown escaping to Cybertron. I'm assuming the TV movie Predacon's Rising will spotlight the climatic fate of the last Predacon versus the Autobots. 

Additionally, What happened to the remaining Vehicons? Did they all fall at the hands of the Autobots assault? We see 3 Vehicon Generals escape after Megatron's demise but they are nowhere to be found when Starscream and Shockwave escape the Nemesis. What happened to Knockout? He attempted to defect to the Autobots side when they resurrected Cybertron and he was punched out by Miko in her Apex Armor. Did she kill him? Is he imprisoned?

Lastly, the hugest unanswered question has to do with Season 3 Episode 8, Thirst. What happened to the infected Airachnid and her Insecticons? We last saw her steadily feeding on her Insecticon minions. Did she drain them all of their Energon or did she merely infect her army and is bidding her time on the moons surface to escape?

Who knows. Hopefully we will get conclusions to these answers in the final installment, Transformers Prime Beast Hunters Predacon's Rising TV Movie. The wait till October is going to be a long one. 

Airachnid - Last seen on the Moon gorging herself on Insecticons.

The Loyal Subjects Transformers and G.I.Joe Vinyl Figures

The Loyal Subjects Transformers Wave 1

Launched around late June 2013, The Loyal Subjects vinyl Transformers figure line burst on to the collectible  vinyl scene like a super nova but somehow didn't really make a huge mark in the Transformers toy collector world. Initially I wasn't a fan. I admit I was pretty biased toward Transformer merchandise that didn't transform. Doesn't that defeat the purpose of a toy line titled "Transformers." Reading the online comments was a litany of negative opinions ranging from too cartoony, too expensive, and the randomness of the blind box release left the main focus group of the figure series in the lurch. Transformers collectors just weren't excited.

The Loyal Subjects 8-inch Dead Prime

Despite this, I thought the designs were rather clean. It so happened that my buddy Shanti picked up 3 figures on his break during Botcon and he brought them back to our booth. We opened 2 of them and saved the third for his girlfriend to open. It turns out I got Optimus Prime and he got Soundwave. Knowing that he collects Optimus Prime figures we traded and that's how I got my first The Loyal Subjects figure.

Coming back from Botcon 2013, I didn't think much about Soundwave. He was on my table. Then I moved him to my desk. I picked him up and played with him a bit. Having very limited articulation and being 3-inches tall, there isn't much you can do with these figures. But still, he was cool. The super deformed art style was cute and the fact that he came with a weapons was a plus.

BAIT exclusive 8-inch Bullet Prime

It wasn't until several weeks later at San Diego Comic-con that Shanti asked me to visit The Loyal Subjects booth and pick up their exclusive 8-inch Dead Prime figure. I put it on the list of things to get in line to pick up. After researching the release time at the Loyal Subjects booth, I came to discover they had a horde of SDCC exclusive figures at multiple retailers. In addition to the 8-inch Dead Prime, there was the BAIT 8-inch Bullet Prime, Toy Tokyo 3-inch Sunstorm, and The Loyal Subjects had 3-inch Cybertron Megatron, 3-inch 2 pack Radioactive Snake Eyes and Camouflage Storm Shadow, and 2 pack Iron Grenadier Destro and Gold Cobra Commander. Additionally, they would have the new G.I.Joe wave 1 line for sale. Holy crap.

Exclusive Iron Grenadier Destro and
Gold Cobra Commander

I was already tasked to pick up Dead Prime for Shanti and I also planned on picking up the Bullet Pirme from BAIT's booth since one of my coworkers knew them and was going to head over there to pick up some stuff for himself. After the first day, I walked the floor with our management team and we ended up passing by The Loyal Subjects booth. I headed over to talk to them to ask when the Dead Prime would be released and when should I come over to stand in line. Since I was there I picked up 6 blind box figures (3 Transformer, 3 G.I.Joe) and their exclusive 3-inch Cybertron Megatron to show a little support.

I was pleasantly surprised by the selection of figures I got from the blind box. In my opinion they are all winners. I got Optimus Prime, Megatron, and Grimlock for the Transformers blind box lot. I got Snake Eyes, Duke, and Destro for the G.I.Joe blind box lot. 

The Loyal Subjects G.I.JOE Wave 1 (minus Storm Shadow)

The following day I headed over to pick up the Dead Prime figure in between business appointments and I picked up another 2 blind box figure. If you can't tell I'm hooked by now. I got a duplicate Optimus Prime and Snake Eyes.

After coming back from SDCC, I did a little research on the rare figures, and also was lucky enough to stumble upon both rare figures from the Transformers Wave 1 series for cheap. I picked both of them up for $5 over their retail price. Score!  Welcome Illest Jazz and Cybertron Bumble Bee.

The compulsion continues. Since my first Soundwave, I have picked up both 8-inch Primes (Bullet Prime and Dead Prime) and I own 15 of the 3-inch figures now. After my initial skepticism, I've become a big fan of this series. Yes, they are expensive for what they are but the artistic aesthetic they exude and the limited nature of their production runs really resonate with me as a collector. I'm hoping to see wave 2 soon. Gah, plastic crack. Crack, crack, crack.

Toy Purchases August 2012

Whelp, I'm still a whole year behind chronicling my collecting habits, lol.

Thinking back, I remember August 2012 being a very slow purchasing month for me. I think that after the insane experience of trying to tackle San Diego Comic-con and grab the SDCC Bruticus set, I was a little burnt out on toys. That being said, I picked up a few things that I had preordered at Big Bad Toy Store and also took one last stab at grabbing some vintage toys from TFSource so i could send some of the Source Points I had accumulated.




The biggest thing I picked up was the release of Maketoys Green Giant (the second 3rd-party Devastator). I specifically went for Green Giant instead of TFC Hercules because of 3 main points. The first was the design. I loved the more anime streamlined design of the separate robots as well as their combined mode. The vehicles also had a certain uniformity that really resonated with me. My second reason for picking up Green Giant over Hercules was quality. While Maketoys was a relative new comer to the scene, TFC has been around for a while and the quality of the plastic and designs are hit and miss. Additionally, TFC released their figures separately over 6 months prior to Green Giant being released and it was reported that Hercules had numerous design and assembly defects, including bad joints and miss assembled figures. The third reason was pricing. At over $100 a figure, the TFC set would set a collector back $650. Green Giant was $360.

While Hercules is a larger figure, in both combined and separate robot modes, I stand by my choice that Green Giant is the better toy. In addition to the standard accessories and combiner parts, he comes with an alternate head that lights up. Also the separate guns from the individual robots combine to become the larger combiner robots main gun. He's a great toy and I dare say probably the best 3rd party robot made to date. He feels and looks better than Fansproject's Corss Fire robot set. Green Giant is a must for any serious Transformer collector.

I also picked up two Japanese Arms Micron Transformers in August, including  Autobot Swerve and the Tokyo Toy Show Exclusive Terrocon Bumble Bee. Both of these purchased were a little frivolous and impulse buys to be honest. Autobot Swerve was purchased because I loved the Arms Micron Breakdown figure that he is based on. They swapped out the head and changed the color palette to Swerves G1 colors, dark red and white. Overall, he's a pretty good figure and I decided I wanted to collect all the Transformers Prime characters, even the non show cannon ones. The only bad thing was, as I described in some of my earlier posts, his head actually broke right out of the package. His neck joint snapped off when I separated him from his zip tie inner cardboard backing. I was pretty bummed out about this and I decided to put him down and leave him where he lay for a night before returning to try and either fix the problem or return him to Big Bad Toy Store.

After a good nights rest, I picked him up and decided I could fix his shattered neck joint. Using a pin and a ton of glue, I refashioned a new neck and securely reinforced the joint. I crossed my fingers and snapped his head back into place. After letting the glue dry, I did a few test swivels and the head was as good as new, probably better considering that new meant broken in this case. Also, his Arms Micron partner is a pretty sweet chain saw weapons too. ^_^

Terrorcon Bumble Bee is a weird oddity. He was a Tokyo Toy Show 2012 Takara Tomy Show Exclusive and the figure I believe references a episode of Prime where Bumble Bee was taken over by the consciousness of Megatron. The packaging make reference of Soundwave somehow converting Bumble Bee into a Decpeticon. Either way he's a black and purple repaint of the regular Prime Robots in Disguise Bumble Bee with the auto transformation gimmick. I think this figure looks pretty cool. It takes on of the most iconic Transformers and literally changes him into a pretty badass looking Decepticon. Terrorcon Bumble Bee comes with Soundwave's Arms Micro partner, which transforms from scorpion to some laser whip weapon. Final word - impressive.

Other than that I picked up a the Kabaya Fortress Maximus set and assembled him. Judging from the assembled figure, he's a pretty good approximation to the original G1 gigantic robot. The Kabaya version stands about 6 inches tall and can fully transform from city, to ship, to robot mode. He comes with both guns and the god sword. Additionally, he has a mini head master that forms his head and a mini Wind Charger and Power Glide figures. These mini figures measure less than a inch high and can limitedly transform from robot to vehicle. Pretty cool miniaturization in this set.

From the TFSource haul, I decided to pick up a few vintage figures which included a mint in box Beast Wars Thunderwing, Transformers Cybertron Overhaul (which I forgot I actually already owned, ugh), 2 Transformers Universe mini bots, Brawn and Beachcomber, and a G1 Deluxe Insecticon Chop Shop. Out of all these bots, really the only one of consequence is Beast Wars  Tiger Hawk. I missed out on him originally when he was out in the stores back in 1999. I finally decided to pick him up and scratch him off my to get list. It's kind of weird to look back at a Beast Wars era Transformer. At the time, Tiger Hawk was one of the most sought after figures in the last wave of toys. He and Transmetal 2 Black Arachnia demand top dollar on the secondary market and they were both extremely hard to find in the stores. I think I saw him a few times but at the time, he was a pretty expensive figure at retail and I believe I had a  ton of my money tied up with the Mobile Suit Gundam In Action figure line that just launched. In the end I'm glad I picked him up but opening him and looking back in time to a 13 year old toy is a little hard to take in. While he was state of the art then, he's a total crappy happy meal type toy now. Ah wells, now I just need to get Beast Wars Scorponok and I can finally close the door on this collecting chapter.

*Image Courtesy of Seibertron.com

Botcon 2013

Botcon 2013 was the second Botcon I attended, the first being Botcon 2011 in Pasadena. 2013 was held in sunny San Diego, 9 hour drive away from the California Bay Area where I reside. Early on, a few friends and I decided that if Botcon was going to be held in California again we would attend. Low and behold, the San Diego location was announced and we were on our way. Initially, the group I was planning on going with were my 2 friends, Grant and Randy, who attended Botcon 2011 with me. However, one of my super hardcore toy collecting friends, Shanti, decided to attend as a dealer. He wanted to bring some of the doubles from his vintage Transformers and Pre-Transformers collection to trade or sell.

Product for sale at Botcon

Having had a ton of experience selling at collectible toy conventions, I decided to help him out and work at his booth. Selling solo at a convention is a major pain with no one to offer breaks for restroom or food. In return Shanti offered to allow me to sell some of my stuff too. Seamed like a great experience, a good way to meet other collectors, and a awesome way to offset the cost of the trip by selling some of my unwanted toys.

Prepping for the show was a little hard since work has been hectic lately. I waited till a few days prior to the trip to really start sorting out what to bring to sell. In the end, I decided to bring a slew of Transformers G1 Encore figures, a few extra carded and MISB Transformers from Beast Wars, Energon, etc, and a smorgasbord of random anime toys I had laying around in storage. Over all I brought what amounted to 8 boxes of toys to sell with a value of about $2,500.00. I hoped I could sell half of them if possible.


Registering for Botcon 2013 was a little hectic. I was returning from a business lunch in San Jose when I randomly checked my email while stuck in traffic. I happened to see the Fun Publication email while I was in traffic and started cutting in and out of lanes to get to my exit. While I was racing home to get to my computer I also called both Grant and Randy to let them know to jump on their computers to register. I got home and registered for both the Primus pack, custom class, and extra custom figure. Grant was able to register for the same load out as well but Randy did not get in the custom class unfortunately. I felt bad so I decided to sell Randy my extra custom figure so at least he would have something.

Generations Sand Storm

Grant and I decided to rent a car and head out Wednesday, June 26 and drive down to San Diego. We would meet Randy who flew down Thursday, and Shanti who was driving down Thursday as well. Grant picked me up and passed off a Transformers Sand Storm he had picked up for me the day before. Oh, what a awesome toy. While reusing the Generations Springer mold, Sand Storm is a totally different beast. I don't think he's superior to Springer but I do think there are enough remolded parts on him to make Sand Storm stand out on his own in a major way.

Frank & Sons Loot

On the way down south, Grant and I decided to make a pit stop a Frank & Sons collectible show. Having been to Frank & Sons previously, we knew there was a Korean vendor that sold Sonokong toys for super cheap and we both wanted to stop by and see if there was anything interesting for sale. Grant picked up Sonokong Car Robots Rail Racer set MOSC for pretty cheap. I picked up 3 Beast Wars II Sonokong Auto Rollers (Auto Jetter, Auto Launcher, Auto Crasher) and a Sonokong Microman Reissue Cassette Copter Spy Heli. All 4 toys are pretty good and the total was $26. I wanted to complete the Auto Rollers for a while and missed out on the clearance sale at Big Bad Toy Store several years ago. Spy Heli also puts me one toy closer to completing my Microman Reissue collection.

Custom Class Blast Charge

Once we got to San Diego, Grant and I checked in and called it a night after grabbing some Vietnamese food. Thursday we got up and headed straight for the Town and Country Convention Center to attend the Custom Class. The custom figure was revealed as Blast Charge, a orange and brown camouflaged Warpath with the new Strika head (super similar camo to G.I.Joe Tiger Force). The figure is a dull choice for me. I was not excited at all but I wanted to make the best of the experience since I already paid for it. I was surprised that the class was so basic. We were handed a set of tools that we had to share and the figure kit which is basically a set of parts on sprue with hardware. The instructions were not very intuitive and I actually made 2 mistakes during assembly. I've put together a ton of plastic model kits, fixed and modded transformers before and I found the only challenge with the class revolved around confusing instructions and the fact that certain steps had to be done by the class staff. I found it strange that the pin holes were all too small and our hand drills were a millimeter too small to provide clearance. Additionally, we were not given the opportunity to glue parts together or hammer pins into place. 

Overall the class attendees were either close friends of each other, who stuck to their own groups, or socially awkward. I have to say it was a unique experience but I do not know if I would attend the class again, especially if I have the ability to just buy the figure separately. 

Botcon 2013 Set

By the end of the class Randy had flown in and I met up with him to grab some food. Grant stayed behind to finish his figure and also planned on attending the unofficial Encline Customization Class afterward. After grabbing a quick bite, Randy and I got in line to pick up our show badge and figure sets. This was actually a pretty easy experience than the long drawn out debacle that Botcon 2011 badge pick up was. I had a little snafu with my badge pick up (I was given a different persons badge by mistake, Steven Ng from Seattle), but after returning to the line and fixing the situation I was off to the Club Store to pick up this years club figure sets. I picked up 2 full sets of the show exclusives, one for my friend Justin who could not attend this year. Overall badge pick up and store purchases totaled 2 hours! My 2011 experience totaled 6 hours and I still had to get a ticket voucher to go back to the store the next day because it was too late. I guess Fun Pub is actually learning how to run a convention. Ha. 

Termination Box Set

Reviewing the toys that night I found I had a broken Obsidian which would need to get replaced the next morning at the trade in booth. This years Botcon set is a hit and miss for me. The Termination Machine Wars Box Set has a few winner and a few big question marks. I love Megaplex, Strika, and Hoist. I think all 3 figures are pretty good. I'm not a fan of the Movie-verse figures so Obsidian, with his awkward designed head and arms, and Skywarp with his action boobs really left me scratching my head. Additionally, I don't understand why they did not group Obsidian and Strika as a separate set and put in some of the other Machine Wars specific character in the box set. As it is, the box set is a Machine Wars / Beast Machines mix. I also do not like the window box which has paint smudges on the window. I also think having the foam showing in the window looks bad and the joke KB price tag makes the set look cheap. An additional note, I learned several days later that there was a misprint on Skywarp which Fun Pub printed the wrong emblems on his wings and also that Hoist is miss-assembled and his shoulders are backwards.

*Image Courtesy of Seibertron.com

The remaining other sets are also hit and miss. I love the Rainmakers set which consists of Sunstorm, Bitstream, and Hotlink (Hotlink still sounds like a 1-800 sex line). The Classic Seeker mold still retains it's classic sleek style and adding 3 more characters to the Seeker Armada is a godsend. The other set includes Electron and Sand Storm. Electron is a gold recolor of Hoist (with his shoulders assembled correctly!). I like him but i wish he had a baton like his G2 original counterpart. Sand Storm is a recolor of Movie-verse Skyhammer. And again, I'm not a fan of the Movie-verse design aesthetic. His Mech-tech type weapon has no lock to extend the blade gimmick out for display and I just can't get over his copter blades wrapping around his chest. To me, he's just a poorly designed mess and a waste of a good slot for a more interesting designed Transformer figure. The show figure is Star Scream based on Movie-verse Terra Dive. Meh. It;s a nice figure and probably one of the better Move-verse figures but he really does not do much for me and does not even look like the original Machine Wars Star Scream figure at all. I sold both my Kreon sets to my friend, Justin, so I don't have an opinion on them.

e-hobby Insect Clone Army

Friday morning, I met up with Shanti in the morning and started set up for our booth. After setting our toys up we chatted with other dealers and I sold a few things early to interested parties. Overall I believe I sold $700 worth of items on my first day. On Saturday I worked at the booth for most of the day. I took a break to attend the Hasbro Brand Panel which unveiled some interesting direction changes for the toy line. I have to say I'm not a fan of their size problem fix. Enlarging the figure and dumbing down the transformation complexity and design will definitely alienate me as a consumer and collector. Also, adding the Lego Bionicle type figures does nothing for me as a collector. I know they are trying to aim for the kids market which is the backbone of profits for Hasbro and their retailers but this new direction will probably help me save money ... which is a good thing I guess. I was excited to see some of the new figures like Skids, Whirl, Gold Fire, and Double Dealer though. Also, Shanti picked up a Loyal Subjects Soundwave figure for me, super nice of him. 

Botcon Loot

On Sunday, I decided to do a little shopping. Overall my sales were pretty steady. A bunch of my high ticket Robotech Toynami and Yamato Veritech / Valkyries sold and I felt like I had money burning in my pocket. Previously, I had talked to Shanti about getting first dibs on some of the toys he was selling and I was able to pick up some pretty choice items, including a slew of Kronoform sets and a loose e-hobby Insecticon set (Minus Energon Cubes). The Kronoform sets included Togor, Modulator, and Invaceptron. Taking a break late in the day, Grant and I walked the dealers room and I picked up Transformers Galaxy Force Blue Ramble (the last regular Ramble figure I was missing from my collection) and I slapped down the $320 and finally picked up Encore Fortress Maximus! Overall Sunday was pretty exciting. I met both Ryan Yzquierdo from Seibertron.com and Jack Hurwitz from Tformers which was a treat for me since I follow both of their sites religiously. Also Jack helped me out a long time ago when I bought my Brave Maximus and it was missing his head master. He emailed Big Bad Toy Store on my behalf which was truly a stand-up move for a website owner to do for a reader.

Now totally tapped out, it was time to pack up. Overall, it was crowded but not insanely so like my past experience in 2011. I was left feeling like there was less attendees this year for some reason but I can't be sure and this is only a feeling I had. Plus I was mainly in the dealers room for most of the time. After it was all said and done I sold about $1454 in products, came out paying for the show and all my new acquisitions with $104 to spare! I brought back a single box of toys that I was unable to sell and a additional full box of new toys. It was totally fun. I have to think about if I ever want to attend the custom class again. I'm not sure it's worth it. The show figures were hit and miss with a ton of factory flaws but some grerat stand out figures. Selling at the show was totally awesome and it was great to meet a lot of fans and also hang out with my good friend Shanti. Hope to do this again sometime soon in the future.

Togor says "Sayonara"

2012 Year in Review (Part 2)

Here's part 2 of my 2012 year in review. While I did

Here are my top 5 Stinkers for 2012:

#5 Transformers Kre-O Collection - Yeah the entire collection sucks. From the confusing ill conceived premise to poor design, this entire initiative by Hasbro has been a huge debacle. I can see why someone in marketing would think that combing Lego type sets with their out performing Transformers line would be peanut butter and jelly time but it is not. It takes hours to build, deconstruct, and rebuild these sets to transform them from vehicle mode to robot and back. Do you think kids have the attention span to do this? Do you think adults do? No one does. The sets try to recreate the characters from the classic Transformers series (be it G1 cartoon, Movie-verse, whatever) but with the absence of abundance of specialized block pieces the Kre-O design sets fail. It was no wonder when these sets started going on clearance halfway through the year. It's baffling to me that they have considered continuing to produce a wave 3 of this toy line, albeit with an emphasis on the Kreon mini figures as opposed to full on deluxe building sets.

*Image Courtesy of Seibertron.com

#4 Transformers Prime RID Airachnia - By far the worse Transformer to come out of the deluxe line in a while is Airachnia. I admit the original Transformers Prime character design is really complex since she is technically a triple changer and super slim but what we got was a rigid brick with the same articulation as a 70's Kenner Star Wars figure. While her helicopter mode looks well and her robot mode kind of represents the character, they failed to give her any articulation of playability. There is absolutely no way she can assume her spider mode transformation without buying 2 or 3 of the same toy and augmenting the chopper blades for extra elongated spider legs. Her gun accessories are also horrific in design. Absolutely the worse toy I've seen in the deluxe scale figures in a long time (not counting the horror of the Bayverse deluxe toys).

*Image Courtesy of Seibertron.com

#3 Transformers Arms Micron Autobot Swerve - This toy is not that bad but the fact that his head broke off seconds after I untied this figure from his plastic tray gives him a place on the 2012 fail list. Quality control has been horrible lately with Takara Tomy / Hasbro figures and Swerve is on this list to represent this fact. I paid $50 for this import figure and his head snapped off out of the box with no pressure applied at all. I expect this will happen more and more and we are all f*cked for collecting Transformers.

*Image Courtesy of Seibertron.com

#2 Transformers Arms Micron Unicon - While the figure looks TV show accurate, his transformation into a rock ship with his face on it and the really lame battle suit mode for RID Optimus Prime and Megatron was really poorly designed and executed. Surprise to me, the figure I got has a small tear in the rubber horns on his head. It looks like his horn was assembled wrong and when the rubber was glued to the PVC plastic base someone tried to adjust the horn to point in the right direction which tore the rubber horn. The horn is pretty secure in its glue and the tear is not loose at all. However whomever tried to adjust the position failed and promptly tied the figure down into it's packaging and moved on with their lowly life, thanks for the defective figure mysteriously incompetent factory worker.

*Image Courtesy of Seibertron.com

#1 Transformers Generations SDCC Bruticus - The worse disappointment in 2012 is SDCC exclusive Fall of Cybertron Bruticus. There was so much anticipation for this set. The first combiner Transformers set in years and we got a very poorly engineered misformed hodgepodge of deluxe figures that mangle themselves together into a Frankenstein monstrosity. The set contains 5 combaticons representing a updated version of the classic G1 progenitor combaticon team. While each figure range from average to above average in vehicle mode, robot mode, and transformation, every single figures combining transformation is a compromise which leads to a misformed mess. With uneven limbs, awkward articulation, and a hollow center mass, Bruticus is a unanimous mess. This toy is my #1 failure of 2012 because it has the most promise to be a centerpiece must have toy of the year but sadly a series of design failures and compromise  hampered it's true potential.

Toy Purchases July 2012

Wow, where did the time go? I blinked and 4 months passed by. Back to catching up with this blog.

July 2012 was a pretty big month for purchasing toys. While I'm usually on the road in June and July, mostly for work, I managed to pick up a bunch of stuff, mainly due to preorders and San Deigo Comic-con. July 2012 is noted for the release of the first wave of the Fall of Cybertron toys, final completion of my Transformers Animated toy collection, and a few Transformers Prime toys.

*Image Courtesy of Tformers.com

Top of the list is the notable SDCC Hasbro Exclusive Transformers toys for 2012. They were the early bird "Rust in Piece" Transformers Prime Terror-con Cliffjumper figure and the Fall of Cybertron Bruticus Set in G1 color scheme. First off is the Terror-con Cliffjumper figure. This figure has a dubious origin as it was originally announced in 2011 under the Transformers Prime First Edition toy line. When that line sputtered out due to what really is considered a mismanagement of channel marketing and sales by Hasbro, the figure was shelved for future release. At the time most Transformers toy collectors did not know if the figure would ever see the light of day until Botcon 2011 when collectors found out the figure was going to released not once but twice. The first release is the SDCC 2012 exclusive figure. The second would be the re-release of the Transformers First Edition Prime series in Fall 2012.

The origins of this figure is also quite unique as well. Spoiler alert, in the first episode of the Transformers Prime animated series, Cliffjumper is killed by Starscream. In the following subsequent episode, Cliffjumper is resurrected as a zombie Transformer by Megatron using a fragment of Dark Energon. Poor Cliffjumper has become the first Transformer zombie in the 30 years of Transformers fandom!

Regarding the figure, "Rust in Piece" Transformers Prime Terror-con Cliffjumper, comes in a special box and insert. The box is created to mimic the characters torso and the inner plastic carton that holds the figure is molded and painted in the colors of Cliffjumper's head. Essentially, this give the collector a mini bust of the character to display.

For the toy, the figure takes the First Edition Cliffjumper mold and adds a new damaged paint scheme with a new zombie head. Additionally, the "Rust in Piece" Transformers Prime Terror-con Cliffjumper comes with 2 exclusive accessories, including a clip on shard of Dark Energon that attaches to the figures chest and a separate larger Dark Energon shard piece that the figure can hold. It's important to note that this is the same exact figure that was released earlier in April 2012 under the Takara Tomy Arms Micron Transformers Prime toy line. The only difference is that Japanese exclusive released figure was molded in Translucent Purple, did not come with any accessories but came with his own Arms Micron mini-con. Overall, I like the more show accurate figure than the Japanese version but this figure is not overly necessary for someones Transformers Prime collection unless you think Transformers zombies are cool.

*Image Courtesy of Seibertron.com

*Image Courtesy of Seibertron.com

The second SDCC 2012 exclusive release is the Fall of Cybertron Combaticon team which combines to form FOC Bruticus. The set includes Blast Off, Brawl, Onslaught, Swindle, and Vortex in what is considered the game accurate G1 color scheme. This massive 6 figure box set was much anticipated and sadly sorely disappoints. While the individual figures are great representations of their in-game selves, the color schemes lack a certain authenticity with the original G1 color scheme. Additionally, the combined form of Bruticus is probably one of the most awful combiner Transformers to be released in some time (that's saying a lot considering the horrible Energon/Super Link combiner era). Sadly, Bruticus' arms and legs are disproportional to his body. Some of this is due to the fact that every single Combaticon figure are deluxe class leading to Onslaught (who forms the torso and chest of Bruticus) being too small and thin for his position on the team.

Another issue that exasperated the above situation is the fact that all the other Combaticons are too big when they transform into their limb forms. The original G1 Transformer Scramble City Transformers were made up of what we can consider a single Voyager class figure and 4 scout class figures which lends the size deferential to a perfectly proportioned combiner Transformers for Menasaur, Superion, G1 Bruticus, and Defensor. It's sad that the lessons learned in 1985 have been completely forgotten in 2012, 27 years later.

*Image Courtesy of TFW2005

On top of that, the set was a limited exclusive that many had to stand in line for up to 6 hours for and shell out $100. AND ... the one I got was defective!!! Yup. My Brawl figure has a huge chunk missing from his head where one of his horns would be. It looks like a piece of plastic was removed from his head while the part was being taken off the plastic sprue during assembly. What a pile of poo.

*Image Courtesy of Seibertron.com

Moving on, I picked up 2 Transformers Prime figures in July. I preordered The Takara exclusive Jet Vehicon and also picked up Airacnid at SDCC. I was surpirsed that Jet Vehicon was so similar to the Robots in Disguise Car Vehicon. He's basically the same figure, with wings and a Arms Micron accessory buddy. Overall, this figure is a good toy though and I'm super happy to add another Vehicon to the Decepticon Army. 

Airachnid on the other hand is pretty horrible. She has a great helicopter mode, no arachnid mode at all, and a basic articulated robot mode. Her robot form is more basic than most of the Cyberverse 2-inch figures that price range easily half as much as this figure's MSRP. While my previous rant about FOC Bruticus was bad, Airachnid should not have been released with her crappy articulation and bad engineering. This figure is probably the worse deluxe class figure, per value and design, that has been released in the last 15 years. Wow, what a turd ... and sadly my dumb ass paid $20 for her at SDCC. Damn my completionist impulses.

*Image Courtesy of Seibertron.com

I also finished up my Transformers Animated collection by purchasing on eBay the last figure I needed Black Arachnia. I have to say this figure is pretty good and probably the best representation of the Black Arachnia character to date. The original Beast Wars figures were either too skinny or way to fat and top heavy. You've read my opinion on the Prime figure in the paragraph above. The Animated figure has a great transformation sequence, a awesome spider mode, and a very well engineered and sculpted robot mode. Over all, pretty top notch for a deluxe figure. 

*Image Courtesy of Seibertron.com

Additionally I picked up Transformers Generations eHobby Scrapheap on eBay. This figure is only available in the eHobby exclusive 3-pack that comes with Battle Damaged Kup and a transparent blue Matrix Hot Rod. Scrap Heap is the rarest of the Junkion warriors and pretty had to come by on his own. I was lucky enough to outbid my competitors and paid $80 (including shipping) to get him. Overall, he shares the same body as Junk Heap and Wrek-gar but comes with an exclusive retooled head and is molded in a darker brown color scheme. I am super happy I got him and he is by far my favorite of the Junkion figures, including the Maiden Japan and Jolly Rodger add on its. 

*Image Courtesy of Seibertron.com

My last eBay purchase for July is Transformers Cybertron Ramble (AKA Transformers Galaxy Force Scrap Heap). I really did not want this guy other than my compulsion to complete my collection. I had previously purchased the Yellow Japanese Scrap Heap at Mandrake Akiba late last year on my trip to Tokyo, Japan. I decided I should collect all the Ramble / Scrap Heaps and took the plunge to pick up the red version. This figure is actually pretty decent for a scout class figure. He has the Force Chip action gimmick which springs out a hidden blade from his barrel and a decent walking tank vehicle mode. I wish he had a little pilot inside his cockpit but for a scout class figure, he's quality. Now I need to keep an eye out on the last blue colored figure. Then there is the infamously difficult to attain Cody Ramble which as a TRU Gift Set Exclusive. Ugh.

The last trio of purchases in July is the first wave of Fall of Cybertron figures, Optimus Prime, Jazz, and Shockwave. I was excited for these figures and they kind of disappointed me. Optimus Prime was very small compared to the War for Cybertron Optimus Prime. The scale comparison was jarring. While I really liked the mold, simplified transformation (because face it the WFC Prime figure was insanely hard to transform right the first few times around), and a competent robot mode, the small stature of the figure really set the product back. when you think of Optimus Prime, you think heroic leader, brave, strong, large and in charge. This guy looks short and lacking. 

*Image Courtesy of Seibertron.com

The same principle goes for Shockwave. He's a great figure. Good transformation. But his short stature and skinny limbs just make him look diminished. This is definitely not the same G1 Shockwave that stands close to 12-inches tall and towers over all other Transformers. Lastly, Jazz. Poor, poor Jazz. Easily the worst of the trio. His huge chest (man breast hood area) stands out like a sore thumb. Transformation is on the level of a Mc Donald's Happy Meal toy and his gun is more of a pistol. 

Well at least I got my eHobby Scrap Metal this month.